|
Stems
Aug 29, 2015 19:41:42 GMT
Post by lewisg on Aug 29, 2015 19:41:42 GMT
Out of interest does anyone have a Viscount/Lambert branded stem that ISN'T 4'' long (or very close allowing for my basic measurements)?
|
|
|
Stems
Aug 29, 2015 21:48:36 GMT
Post by vtchuck on Aug 29, 2015 21:48:36 GMT
Out of interest does anyone have a Viscount/Lambert branded stem that ISN'T 4'' long (or very close allowing for my basic measurements)? I'm not certain, but I believe they were all 100mm, just like the cranks were 170mm 52/42. (Or 52/42/32 for triples) I did find that the Viscount clamp bolt w/ the "V" on it, fit an older SR stem, so that might be a work around.
|
|
|
Stems
Aug 29, 2015 22:42:50 GMT
via mobile
Post by lewisg on Aug 29, 2015 22:42:50 GMT
Interesting. Yeah 100mm seems about right. Only asking as I'm possibly looking for shorter for my Pro and longer for my KP in order to attempt to make a too large/too short bike fit respectively.
The KP actually has a shorter stem (GB from memory) so a 100mm Viscount stem may be the solution there.
|
|
bendo
Viscount
Posts: 538
|
Stems
Aug 31, 2015 0:48:32 GMT
Post by bendo on Aug 31, 2015 0:48:32 GMT
I've not seen a shorter Viscount stem in my travels either. They all seem to be the same length. Victor came with a really short stem that was stamped with "New Alloy" on the front. made me wonder what kind of alloy was being used in all my other components... b
|
|