|
Post by lewisg on Mar 12, 2015 20:59:58 GMT
Hi all,
Any tips on removing downtube shifter hoods (Shimano) whilst preserving the hoods themselves?
|
|
|
Post by velocipete on Mar 13, 2015 6:55:52 GMT
A thin bladed screw driver to open a gap between the hood and the lever.Then GT85 squirted in. Work it around the lever an should just slide off. Cheers, Pete.
|
|
|
Post by lewisg on Mar 13, 2015 18:54:48 GMT
A thin bladed screw driver to open a gap between the hood and the lever.Then GT85 squirted in. Work it around the lever an should just slide off. Cheers, Pete. Cheers Pete - That's the route I was planning to take. Will give it a go.
|
|