Post by rodh on Oct 7, 2020 16:42:34 GMT
I've got a pair of cranks that I want to rescue, where the PO has stripped the thread .... and I mean properly stripped ... a pedal drops in!
I reckon an insert is required here (after reaming and tapping to 5/8"-24) but I don't have the kit, and Unior or Recoil ones are not cheap!
Does anyone have a kit they'd rent out, or know of an LBS in the UK that does a thread repair service (ideally west of London so I can visit)?
I see someone on eBay asking fir £28 per crank which puts me off a bit!
Any advice appreciated,
Rod
I reckon an insert is required here (after reaming and tapping to 5/8"-24) but I don't have the kit, and Unior or Recoil ones are not cheap!
Does anyone have a kit they'd rent out, or know of an LBS in the UK that does a thread repair service (ideally west of London so I can visit)?
I see someone on eBay asking fir £28 per crank which puts me off a bit!
Any advice appreciated,
Rod