bendo
Viscount
Posts: 538
|
Post by bendo on Feb 3, 2017 6:24:16 GMT
Does anyone have a particular jockey wheel they prefer when rebuilding prized old derailleurs?
In this case I'm working on my Suntour Cyclone GT. It takes a 10 tooth wheel and is slightly narrower than your basic Shimano of the same era (mid 70s). I'd prefer aluminium alloy to plastic, but either way I'm really after one that has it's own sealed bearing.
b
|
|
|
Post by vtchuck on Feb 3, 2017 14:28:20 GMT
You may be able to find Bullseye pulleys on eBay. Tend to be pricey, but last forever.
|
|
|
Post by oldroadietehachapi on Feb 4, 2017 0:06:20 GMT
|
|
bendo
Viscount
Posts: 538
|
Post by bendo on Feb 5, 2017 11:33:42 GMT
Thanks for the tips guys. I saw both of these on eBay but it's good to have some personal recommendations. Thanks! b
|
|
|
Post by wheelson on Dec 2, 2017 0:49:12 GMT
Better late than never: In my bought-but-never-used stock, I found a pair of the pulleys Jim shows in the eBay listing. They are sold under the name Chaser Tech. They come with an assortment of washers and fit the Crane / Titlist derailleurs well. I'm using mine on my previously known as "unknown" Viscount Aerospace. Best, john "wheelson"
|
|